Owner`s manual

R5975765 RCVDS05 020997
61
R5975765 RCVDS05 020997
61
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
The available commands :
ADDR 01HAddress RCVDS is displayed on RCVDS
STDBY 0EH Standby
NUM_0 10HNumeric keys
NUM_1 11H "
NUM_2 12H "
NUM_3 13H "
NUM_4 14H "
NUM_5 15H "
NUM_6 16H "
NUM_7 17H "
NUM_8 18H "
NUM_9 19H "
SAT_UP 2CH Color saturation up
SAT_DN 2DH Color saturation down
HUE_UP 2EH Color tint up
HUE_DN 2FH Color tint down
SHA_UP 36HSharpness up
SHA_DN 37HSharpness down
VOL_UP 38HPrefading up
VOL_DN 39HPrefading down
Example : STX OFFS ADR 15H x x x x CHKS will switch the RCVDS05 to source 5.
+OFFS
This action is exactly the same as pressing key 5 on the RCU or the frontpanel of the
RCVDS05.
Another example : how to switch the RCVDS to source 12.
Example : RCVDS-address = 03
To switch the RCVDS05 to soruce 12, we have to send key 1 and then within 2
seconds key 2. This is exactly the same as pressing on key 1 and then key 2 on le
local keyboard or remote control.
send key 1 :
02 00 03 11H 0 0 0 0 14H
offset 0 is permitted
RCVDS answers 06 (ACK)
send key 2 :
02 00 03 12H 0 0 0 0 15H
RCVDS answers 06 (ACK)
If we should use 10H for the offset, then we should have for sending key 1 :
02H 10H 13H 21H 10H 10H 10H 10H 74H
STX OFFS ADDR0 CMD0 DAT0 1....4 CHKS0
CHKS0 = ADDR0+CMD0+DAT01+DAT02+DAT03+DAT04
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
The available commands :
ADDR 01HAddress RCVDS is displayed on RCVDS
STDBY 0EH Standby
NUM_0 10HNumeric keys
NUM_1 11H "
NUM_2 12H "
NUM_3 13H "
NUM_4 14H "
NUM_5 15H "
NUM_6 16H "
NUM_7 17H "
NUM_8 18H "
NUM_9 19H "
SAT_UP 2CH Color saturation up
SAT_DN 2DH Color saturation down
HUE_UP 2EH Color tint up
HUE_DN 2FH Color tint down
SHA_UP 36HSharpness up
SHA_DN 37HSharpness down
VOL_UP 38HPrefading up
VOL_DN 39HPrefading down
Example : STX OFFS ADR 15H x x x x CHKS will switch the RCVDS05 to source 5.
+OFFS
This action is exactly the same as pressing key 5 on the RCU or the frontpanel of the
RCVDS05.
Another example : how to switch the RCVDS to source 12.
Example : RCVDS-address = 03
To switch the RCVDS05 to soruce 12, we have to send key 1 and then within 2
seconds key 2. This is exactly the same as pressing on key 1 and then key 2 on le
local keyboard or remote control.
send key 1 :
02 00 03 11H 0 0 0 0 14H
offset 0 is permitted
RCVDS answers 06 (ACK)
send key 2 :
02 00 03 12H 0 0 0 0 15H
RCVDS answers 06 (ACK)
If we should use 10H for the offset, then we should have for sending key 1 :
02H 10H 13H 21H 10H 10H 10H 10H 74H
STX OFFS ADDR0 CMD0 DAT0 1....4 CHKS0
CHKS0 = ADDR0+CMD0+DAT01+DAT02+DAT03+DAT04