Manualshelf

Owner`s manual

ManualsBrandsBarco ManualsProjectorR9827880
21222324252627282930
R5975765 RCVDS05 020997
27
R5975765 RCVDS05 020997
27
SPECIAL MODULES
SPECIAL MODULES
Switch function RS232 - BARCO
a) RCVDS05 used with BARCO projector : switch in position "BARCO".
b) RCVDS05 used as stand alone unit : switch in position "BARCO".
c) RCVDS05 controlled by a central computer : switch in position "RS232"
Address setting on module level.
This address setting is only necessary in stand alone use and during the control with
a central computer.
Addresses between 0 and 15 are possible.
Address setting is a hardware set up on the communication interface module.
Therefore 4 DIP switches are provided on the module.
Each DIP switch has its own decimal value. The sum of the values associated with
those DIP switches gives the address.
Switch Value
11
22
34
48
Example : address 7
DIP switch 1 2 3 4
setting 1 1 1 0
Summary : 1x1 + 1x2 + 1x4 + 0x8 = 7
SPECIAL MODULES
SPECIAL MODULES
Switch function RS232 - BARCO
a) RCVDS05 used with BARCO projector : switch in position "BARCO".
b) RCVDS05 used as stand alone unit : switch in position "BARCO".
c) RCVDS05 controlled by a central computer : switch in position "RS232"
Address setting on module level.
This address setting is only necessary in stand alone use and during the control with
a central computer.
Addresses between 0 and 15 are possible.
Address setting is a hardware set up on the communication interface module.
Therefore 4 DIP switches are provided on the module.
Each DIP switch has its own decimal value. The sum of the values associated with
those DIP switches gives the address.
Switch Value
11
22
34
48
Example : address 7
DIP switch 1 2 3 4
setting 1 1 1 0
Summary : 1x1 + 1x2 + 1x4 + 0x8 = 7