ClickShare Safety Guide R5900005/03 15/07/2013
Barco nv President Kennedypark 35, 8500 Kortrijk, Belgium Phone: +32 56.23.32.11 Fax: +32 56.26.22.62 Support: www.barco.com/esupport Visit us at the web: www.barco.
1. Safety 1. SAFETY About this chapter Read this chapter attentively, it contains important information to prevent personal injury while using ClickShare. It also includes several cautions to prevent damage to the ClickShare product. Ensure that you understand and follow all safety guidelines, safety instructions and warnings in this chapter before using your ClickShare.
1. Safety Article number Guide Service Guide R5900006 (Only available to Customer Service partners) Button Guide R5900007 Rack Mount Guide R5900008 Recycling Manual R5900009 (Available upon request) A printed copy of the Safety Guide and Quick Start Guide is included in the ClickShare box at purchase. Please check online for the other documents. 1.1 General safety Safety warnings The installation of the device must comply with the guidelines in the ClickShare Installation Guide (R5900004).
1. Safety 1.2 Service Risk of electric shock Do not open. To reduce the risk of electric shock, do not remove the cover. No user- serviceable parts inside. Refer all servicing to qualified service personnel. Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: 1.3 • When the power cord or plug is damaged or frayed. • If liquid has been spilled into the equipment. • If the product has been exposed to rain or water.
1. Safety Environment Do not install the device in a site near heat sources such as radiators or air ducts, or in a place subject to direct sunlight, excessive dust or humidity. Be aware that room heat rises to the ceiling; check that temperature near the installation site is not excessive. 1.
1. Safety 1.6 Adapter types ClickShare Link Type A power input AC clip Image 1-1 Type C power input AC clip Image 1-2 Type G power input AC clip. Image 1-3 Type I power input AC clip (two pins) Image 1-4 1.7 Compliance FCC Federal Communication Commission Interference Statement You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment.
1. Safety • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. this device may not cause harmful interference, and 2.
