Installation guide

5. Configuring ClickShare
The bottom of this page contains important status information suc h as proper functioning of all pro cesses on the Base Unit and
system temperatures.
3. If desired, c lick Restart System to rest art or click Shutdown System to shut down.
Consulting Buttons information
The Buttons tab page of the web interface gives information on the Buttons that have been paired to the Base station.
To ge t information on the Buttons pa ired to the Base
1. Go to the C lickShare web interface.
2. C lick the Maintenance tab and click Buttons.
The Buttons tab page is d isplayed.
Image 5-13
The list gives an overview of the Buttons that hav e in the past been paired to this Base Unit. If a Button has in the meantime
been paired to another Base Unit, it will s till appear in this list. To remove it from the list, at the right of the tab page , click More
and select Remove from list.
In the overview of paired Buttons, for each Button that has been paired to this Base Unit, you will find:
- whether or not the Button is connected to the B ase Un it
- the s pecific serial number
- the date the B utton was last connected
- the status
Status indication
Explanation
OK Button firmware and software are up to date. The B utton has been paired to the Base Unit.
WARNING Button fi rm w a re v e rsion differs from the Base Un it fi rm ware version, but the Bu tton c an still be
used. Pairing the Button is advised.
ERROR The Button needs to be paired to the Base Un it again before us ing it. The Button firm ware ve rsion
is inc ompatible with the Base Unit firmw a re version.
3. To get more information on the Button firmw are, the number o f co nnections and the MAC address, click More....
32
R5900004 CLICKSHARE 21/08/2012