Installation guide

5. Configuring ClickShare
The Advanced tab page is displayed.
Image 5-11
3. If desired, in the L AN Network Setting s section, change:
- the addressing: DHCP Assigned or Fixed Ad dress.
- the DHCP Client ID.
- the hostname (by default ’ClickShare-<se rial base number>’)
4. In the WiFi Settings section, you can no w:
- enter a public name (SSID) for the wireless network.
Default SSID = ClickShare-<serial base numb er>
- indicate whether you want to broadcast the SSID or not.
- enter a pas sphrase and confirm it.
Default passwo rd = clickshare
- select the wireless connection frequency band: 2.4 GH z or 5 GHz.
- change the wireless connection channel.
The channels available in the list vary according to the regional version of your B ase Unit. Repairing Buttons is not required
when changing the frequency band or wireless connection channel.
5. C lick Apply to confirm your changes or click Refresh Pag e to cancel them.
WARNING: It is not allowed to operate th
e Base Unit outside its intended geographical region.
Maintenance
On the Maintenance tab page of the web interface y ou can check the status of your C lickShare, get an overview of the paired
Buttons, update the software, manag
e the sy st em configuration, c hange the adm inistrator password and change the logging settings.
R5900004 CLICKSHARE 21/08/2012
29