Installation guide

4. Installing ClickShare
4. INSTALLING CLICKSHARE
This chapter gives an overview o f the different ways to install the ClickShare product.
• Installatio n methods
• On the table
• Wa ll moun ted
• Mounted in a rack
• Mounted to the ceiling
• Connecting
WARNING: D o not connect to the mains power during installation.
WARNING: Make sure the mains p ower is w ithin range o f the users at all times!
CAUTION: You cannot mount the Base Unit under a random angle. It should be mounted horizontal.
WARNING: Only use the antennae t hat are delivered with the pro duct. Other an tennae a re n ot allowed.
4.1 Installation methods
Introduction to the ins tallation methods
There ar e three different ways to ins tall the B ase Unit in a meeting r oom. The Base Unit can be wall m ounted or put on the meeting
room table. A third possibility is to mount the Base Unit to the ceiling.
The antennae are rem ovable so they can be fixed to the Base Unit depending on the way the Base U nit is installed in the room. You
can rotate the antennae for better wireless connection.
Using extension cables for the antenn ae is allowed, but this ca n reduce p erformance.
For optimal performance, install the Base Unit close to the d isplay and avoid obstacles between the Base Unit
and t he Buttons. Do not block the fan inlets and outlets of the Base Unit!
4.2 On the table
Placing the Base Unit on a table
You can easily put the Base Unit on a meeting room table.
The total weight of the Base Unit is 2,6 k g.
CAUTION: Wh en p lacing the Bas e U nit inside a closed cabinet, make sure there is sufficient ventilation for
hot air exhaust.
R5900004 CLICKSHARE 21/08/2012 13