Installation guide

2. ClickShare Specifications
Standby button
The b utton at the front of the B ase Unit h as a power on/off function and a standby function.
• When the system is awake, a short push triggers the system to go into standby mode.
• When the sy stem is in standby mode, a short push triggers the system to wake up.
• When the system is powere d on, a long push mak es the system to s hut down and power off.
• When the system is shut dow n, a long push or short push triggers the system to start up.
Back la yout of the Bas e Unit
At the back of the Base U nit you can find the rocker switch, the label, the ports and connectors of the B ase Unit.
1 2 3 4 5 6 7 8 9 10 1
Image 2-3
Backside of the Base U nit
1 Fixture points for the antennae
2 Label containing the article number and power rating of the product
3 Mains power connector
4 Rocker switch
5 DVI-I display connector
6 DisplayPort connector
7 LAN Ethernet connection
8 4 USB ports
9 Audio In port
10 Audio Out port
Rocker switch
You can use the rocker sw itch to power on and off the Base Unit.
• ToswitchontheBaseUnit,settherockerswitchto“I”.
• To shut down the sy stem, set the r ocker switch to “0”.
Mechanical fix ture points
At the bo ttom of the Base Unit you can see the mec hanical fi xture points.
Antennae
Tw o antennae are included in the ClickShare box at purchase. To avoid damage during transport, they are not p re-mounted. De-
pending on the installation m ethod you s hould secure the antennae to the back of the Base Unit or to the front panel of the rack
mount.
You can rotate the antennae for better w ireless connection.
Ventilation grids
On the top and sides of the Base Unit you can find ventilation grids.
R5900004 CLICKSHARE 21/08/2012
7