Installation guide

2. ClickShare Specifications
2.2 About the Base Unit
Base Un it
The Base Unit receives the wireless input from the Buttons and c ontrols the content of the meeting room display.
The B ase Unit can be installed in three different wa ys. For more information on the actual installation, refe r to " Installing
ClickShare", page 13.
Front layout of the Base Unit
At the front of the B ase Unit you can find a standby button, status LED strips and a USB port.
2 1 3 2
Image 2-2
Base Unit
1 USB port
2StatusLEDstrips
3 Standby button
USB port
Yo u can use t he USB port to update the software of both the Base Unit a nd the B uttons.
When you plug the Button into the Base Unit, the Button is paired to the Base Unit. The Base Unit c hecks whether the B utton’s
software and firmware ar e up to date. If not, the B ase Unit upda tes the software and/or firmware.
To update the Base Unit software, download the latest version of the software from the Barco website. Copy the file on a USB stick
and plug it into the USB port of the Base U nit. Follow the progress and instructions on the display.
Status LED strips
The c olor of the LEDs at the front of the Base Unit give information on the status of the system.
LEDs behavior Explanation
static red
• receiving content from the Buttons and streaming towards the display.
• pairing and software update of the Button is d
one. You c an now unplug the
Button from the Base Unit.
• during the first phase of the Base Unit bo ot process.
blinking white
• system is starting up (during the second phase)
• Button pairing is in progress
• software update of the Base Unit
slow blinking white
• standby mode (i.e. muting the display output)
static w hite
• awake and ready (i.e. showing the welcome message on the display)
• pairing is done
red blinking
• an error occurre d
6 R5900004 CLICKSHARE 21/08/2012