Installation guide

6. Web Interface
3. Use the Up and Down arrow keys to select Load Default Settings in the boot m enu (Grub) and press ENTER.
6.24 Administrator password
About the administrator password
The administrator password to log in in the web interface can be changed at any time.
To change the administrator password
1. Log in t o the ClickShare web interface.
2. Click the Maintenance tab (1) and then click Password (2)..
The content of the P assw ord tab is displayed.
Image 6-38
Password
3. Enter the old password (3).
4. Enter the new password (4).
5. To confirm, enter the new password a second time (5).
6. Click Apply.
The adm inistrator password is changed.
6.25 Log settings
About l ogging
Both Button and Base Unit log data is save d in log files on the Bas e Unit. These log files c an contain debugging information. They
can be downloaded on a local com puter and cleared on the Base U nit
How to use
1. Log in t o the ClickShare web interface.
2. Click the Maintenance tab (1) and then click Logging (2). .
62 R5900004 CLICKSHARE 04/12/2013