Installation guide

6. Web Interface
Image 6-22
WiFi settings
3. Enter a public name (SSID) for the wireless network.
The default SSID is ClickShare-<serial base nu mber>.
4. If you w ant to br oadcast this S SID, check the chec kbox behind Broadcast S SID.
5. Enter a new pas sword and c onfirm that password.
6. Select the wireless con nection frequency b and: 2.4 G Hz or 5 G Hz by clicking on the dro p down box and selecting the correct
setting
Note: Make sure your PC’s w ireless interface s upports the 5 GHz band before selecting it on the Base Unit.
7. Select the wireless connection channel by clicking on the drop down box and selecting the d esired c hannel.
The channels available in the list vary according to the regional version of your Base Unit. R e-pairing the Buttons is not required
when changing the frequency band or wireless connec tion channel.
8. Click Apply to confirm the changes.
6.14 Advanced settings: Access web interface
About a ccess
The web interface is always accessible via the Ethernet port. Acc ess v ia the wireless interface can be enabled or disabled.
How to enable-disable
1. Log in t o the ClickShare web interface.
2. Click the Setup tab (1) and click Advanced (2).
3. To enable access via wireless interface, check the check box next to Ena ble access via wireless interface (3).
50
R5900004 CLICKSHARE 04/12/2013