Installation guide

4. ClickShare installation
4.10 Connecting an iOS device
The o ptional Hardware add -on ClickShare Link is need ed to conn ect an iO S device.
About an iOS dev ice connection
The ClickShare Link allows users to get the c ontent from an iOS device touchscreen to the large meeting room screen. T he iOS
device behaves like an additional laptop. Note that the ClickShare Link only streams video, sound is not supported.
The ClickShare Link is t o be attached to the (rear) USB port of the ClickShare Base Unit.
For the iO S device itself, there are two ways to connect to the ClickShare Link:
• Cable connection, requires an HDMI adapter for iO S device.
• Wireless, requires an Apple TV. AirPlay needs to be activated on the iOS device.
Only 1 iOS device and ClickShare Link combination allowed per ClickShare base U nit. Mul tiple iOS device
can be used when using the ClickShare A pp.
Connection via cable
1. Connect a USB cable between the ClickShare Link USB port and one of the backside USB ports of the Base Unit.
USB
USB
HDMI
iPad
ClickShare Base Unit
HD
ClickShare Link
Image 4-12
iPad connection via cable
2. Connect an HD MI to DVI video cable to the DV I input of the C lickShare Link or place the convertor from DVI to HDMI on the
ClickShare Link and connect an H DMI c able.
3. Connect the power adapter to the power input of the ClickShare Link.
4. Slide a power input adaptor piece on the power adapter of the ClickShare L ink . Use the one which is a pplicable in your country.
Image 4- 1 3
Type A
Image 4-14
Type C
Image 4-15
Type G
Image 4-16
Type I
5. Connect the power cable of ClickShare Link to wa ll outlet.
6. Connect the HDMI side of the cable into the iOS de vice HDMI convertor. (iOS device convertor 30 pin or Lightning connection
to HDM I)
The content of the screen will be displayed on the meeting room screen.
R5900004 CLICKSHARE 04/12/2013
27