Installation guide

4. ClickShare installation
DVI
DisplayPort
DVIDisplayPort
Image 4-7
Display connections
When the second display has no display port input, use an adapter from display port to DVI to connect the display. An active
adapter is allowed. Use a USB port at the back side of the Ba se Unit to power the adapter.
4.7 Audio connection
About audio
The ClickShare Button captures the audio o utput of the user ’s laptop and sends it to the Base U nit together with the video signal.
The B ase Unit will then mix the audio signals from all Buttons that are sharing their content. T he mixed audio will be outp ut at line
levels from the mini jack socket (3.5mm) (green connector on the back of the Base unit).
It is up to the us er to decide whether or not to send the audio signal together with the video signal. The user can decide this by
using the same tools as he would to control the laptop’s speakers or a headphone: the audio c ontrols of the ope rating system (eg for
Windows: Control Panel > Sounds and audio dev ices) or the physical buttons on the keyboard of their laptop (mute/unmute, lower
volume, higher volum e).
There will be synchronization between the audio and video signal.
How to connect separate audio
1. Connect an audio cable with m ini jack socket (3.5mm) into the audio out of the Base unit.
Image 4-8
2. Connect the other side to the meeting room’s sound system.
24 R5900004 CLICKSHARE 04/12/2013