Projector User Manual
Table Of Contents
- toc
- 1. Packaging and Dimensions
- 2. Installation Guidelines
- 3. Connections
- 4. Getting started
- 5. Source Selection
- 6. General Menu
- 7. Image Menu
- 8. Tools Menu
- 9. Signal Menu
- 10. Lamp Menu
- 11. Image files menu
- 12. Display setup
- 13. Installation menu
- 14. Desktop integration
- 15. iQ Network
- 16. General guidelines on Network Configuration
- 17. Exchange
- 18. SNMP services
- 19. Troubleshooting
- 20. Cleaning the dustfilters
- 21. Standard Image Files
7. Image Menu
7. IMAGE MENU
Overview
• Settings
• Aspect ratio
• Show native resolution
• Keystone
• Color temperature
• Filmmode detection
•Blanking
• Input balance
• AGC on Video
• Manual Gain Control
7.1 Settings
Overview
• Contrast
• Brightness
• Color
• Tint (hue)
• Sharpness
• Gamma
• Phase
• Noise reduction
What can be done ?
Correct image settings are important for a good image reproduction. The image settings are made through a dialog box with a scroll
bar. Minimal, maximal and actual values are indicated. These settings can also be done directly via the RCU’s dedicated buttons,
except for the sharpness.
Image 7-1
Image 7-2
R5976694 IQ PRO R500 01/02/2007 55