Projector User Manual
Table Of Contents
- toc
- 1. Packaging and Dimensions
- 2. Installation Guidelines
- 3. Connections
- 4. Getting started
- 5. Source Selection
- 6. General Menu
- 7. Image Menu
- 8. Tools Menu
- 9. Signal Menu
- 10. Lamp Menu
- 11. Image files menu
- 12. Display setup
- 13. Installation menu
- 14. Desktop integration
- 15. iQ Network
- 16. General guidelines on Network Configuration
- 17. Exchange
- 18. SNMP services
- 19. Troubleshooting
- 20. Cleaning the dustfilters
- 21. Standard Image Files
20. Cleaning the dustfilters
20. CLEANING THE DUSTFILTERS
Overview
• Dustfilters
• Cleaning
20.1 Dustfilters
Location of the filters
There are 4 filters located at different positions
1. Filter1: Lamp 1
2. Filter2 : Lamp 2
3. Filter 3 : X-Cube filter
4. Filter 4 : Input filter
Image 20-1
location of the filters
1lampfilter1
2lampfilter2
3 x-cube filter
4 input filter
20.2 Cleaning
How to clean the dustfilters ?
1. Place the projector so as to access easily the filter to be cleaned
2. Push the handle downwards to unlock the filter. (image 20-2)
3. Slide out the filter (image 20-3, image 20-4, image 20-5)
See image 20-6.
4. Clean the dust filter with a dry cloth.
5. Re-insert the dust filter by sliding it back in
the filter housing.
Image 20-2
Location of the x-cube filter and its handle
R5976694 IQ PRO R500 01/02/2007 183