Projector User Manual
Table Of Contents
- toc
- 1. Packaging and Dimensions
- 2. Installation Guidelines
- 3. Connections
- 4. Getting started
- 5. Source Selection
- 6. General Menu
- 7. Image Menu
- 8. Tools Menu
- 9. Signal Menu
- 10. Lamp Menu
- 11. Image files menu
- 12. Display setup
- 13. Installation menu
- 14. Desktop integration
- 15. iQ Network
- 16. General guidelines on Network Configuration
- 17. Exchange
- 18. SNMP services
- 19. Troubleshooting
- 20. Cleaning the dustfilters
- 21. Standard Image Files
15. iQ Network
Image 15-8
Image 15-9
projector list: contains a
projector and a projector group
sub list
Image 15-10
Depending on the installed network (use of DHCP server or not), the IP address may be needed to be entered
or not.
For a point to point installation the projector’s IP address must be entered manually.
Check the operating system on the for the IP address, or contact your IT administrator.
How to add a projector group to the projector group list ?
1. Click on the white arrow
A menu is displayed, image 15-9
2. Click on the + sign of the projector group list
A dialog box is displayed (image 15-11)
3. Fill in the group name
4. Click OK to confirm or Cancel
The group is now added to the list of groups
138
R5976694 IQ PRO R500 01/02/2007