Projector User Manual
Table Of Contents
- toc
- 1. Packaging and Dimensions
- 2. Installation Guidelines
- 3. Connections
- 4. Getting started
- 5. Source Selection
- 6. General Menu
- 7. Image Menu
- 8. Tools Menu
- 9. Signal Menu
- 10. Lamp Menu
- 11. Image files menu
- 12. Display setup
- 13. Installation menu
- 14. Desktop integration
- 15. iQ Network
- 16. General guidelines on Network Configuration
- 17. Exchange
- 18. SNMP services
- 19. Troubleshooting
- 20. Cleaning the dustfilters
- 21. Standard Image Files
15. iQ Network
Image 15-5
When resetting the PC the menuitems in the BarcoIQ Server menu are greyed out during a short period.
Projector Standby state setting
This setting defines what should happen with the BarcoIQ Server when the projector is switched to standby.
The BarcoIQ Server can stay in the ON state or it can be switched OFF
Projector On state setting
This setting defines what should happen with the BarcoIQ Server when the projector is switched on.
The BarcoIQ Server can stay OFF (switching on can then happen manually in the general menu) or it can be switched on (at the
same time as the projector)
Automatic start up: How to set the automatic startup ?
1. Press MENU to activate the Toolbar
2. Press → to select Ins tallation
3. Press ↓ to Pull down the menu
4. Use ↑ or ↓ to select BarcoIQ Server settings
5. Press ENTER
6. A dialogbox is displayed (image 15-6)
7. Select ON for the “Projector On state” setting
The BarcoIQ Server will now be automatically switched on at the next startup of the projector
Image 15-6
The BarcoIQ Server will be switched on but not necessarily selected by default, go to Source selection in the
menu to select the iQ PC.
136 R5976694 IQ PRO R500 01/02/2007