Projector User Manual
Table Of Contents
- toc
- 1. Packaging and Dimensions
- 2. Installation Guidelines
- 3. Connections
- 4. Getting started
- 5. Source Selection
- 6. General Menu
- 7. Image Menu
- 8. Tools Menu
- 9. Signal Menu
- 10. Lamp Menu
- 11. Image files menu
- 12. Display setup
- 13. Installation menu
- 14. Desktop integration
- 15. iQ Network
- 16. General guidelines on Network Configuration
- 17. Exchange
- 18. SNMP services
- 19. Troubleshooting
- 20. Cleaning the dustfilters
- 21. Standard Image Files
13. Installation menu
13.10 Gemini installed (only for GEMINI CADWALL systems ! )
When to enable ?
Gemini is option is necessary when the iQ is used in a Gemini 2 channel CADWALL system. By enabling Gemini the restrictions
relative to the allowed difference in the number of total lines are changed :
• 1 line for non interlaced sources (instead of 0)
• 2 lines for interlaced sources (instead of 1)
The default setting is NO. Never activate this option if not in presence of a Gemini CADWALL system.
How to enable Gemini ?
1. Press MENU to activate the Toolbar
2. Press → to select the Installation item
3. Press ↓ to Pull down the Installation menu
4. Use ↑ or ↓ to select Gemini installed (image 13-19)
5. Use ↑ or ↓ to select ON
6. Press ENTER
The Gemini option is enabled
Image 13-19
124 R5976694 IQ PRO R500 01/02/2007