User`s manual

P ULSAR BG Audio SubCarrier Input
Page 7
5.2 Settings AUX Input
SETTINGS
LEVEL MODE
FREQ
DEFINE AUX INPUT:
VID/Asub-c FM
INPUT
AUX AUTO
MAIN
Basically, the procedure is the same.
•
Connect now the signal to the AUDIO SUBC AUX Input on the rear panel.
•
To do the alignment refer to chapter 6: Alignment.
If the option Audio/Video Aux Input is installed, the P
ULSAR switches automatically from Main to Aux
input, after a selectable delay. Otherwise it is only possible to toggle manually on the front.
In the menu DEFINE AUX INPUT, an extra selection will become available: VID/Baseband AUD.
Together with the CompIF Aux Input option an extra selection will be possible in the DEFINE AUX
input: CompIF Aux Input
It is not necessary to select the same kind of signal in the DEFINE AUX INPUT as in the DEFINE
MAIN INPUT menu.
It is not possible to work with a combined audio and video subcarrier signal.
The video and the audio subcarrier signal have to be connected separately.
WARNING