User`s manual

Main Scr/Aux Unscr P ULSAR BG
Page 10
•
Select the
CONFIG button
•
Select the MAIN TO AUX DELAY with the
UP and DOWN arrow.
•
Select the delay time (between 1 and 120 seconds) with the
UP and DOWN arrow.
•
Confirm by pressing
ENTER.
SYSTEM
STATUS LOCK
CONFIG
MAIN TO AUX DELAY:
005 sec
selectable between
1 and 120 sec
•
Select the VIDEO DC OFFSET in the
MODE menu with the RIGHT or LEFT arrow.
•
The modulation depth of the main input is indicated. Pushing the
UP or DOWN arrow will result in
the following display:
!THIS IS AN ALIGNMENT!
<PRESS ENTER OR ESCAPE>
•
Press
ENTER
SETTINGS
LEVEL MODE
FREQ
VIDEO DC OFFSET:
_ _ _ _ _ _ _ _ _ _ _ _ _ _
+000
M=88%
•
Align the Video DC-offset to obtain the correct modulation depth (and RF-level). The correct
modulation depth depends on the standard.
•
The modulation depth of the scrambled video signal can be changed in an identical way as for a
clear video signal.
As long as the scrambler remains the same, the offset should not be
changed.
REMARK