User`s manual

P ULSAR BG Main Scr/Aux Unscr
Page 9
5 SETTINGS
- In the AUX status the PULSAR works as in a standard configuration.
- When selecting the
MAIN input, note that the item about clamping, video
AGC and modulation depth measurement in the
MODE menu is not available
anymore.
•
Select the
MAIN input.
•
Scroll into the
MODE settings with the LEFT or RIGHT arrow to the DEFINE MAIN INPUT item.
•
Use the
UP or DOWN arrow to scroll through the different types of signal. Select VID/Baseband
AUD and confirm with
ENTER.
•
Select the
AUX input
•
Scroll into the
MODE settings with the left or right arrow to the DEFINE AUX INPUT item.
•
Use the
UP or DOWN arrow to toggle through the different types of signal. Select VID/Baseband
AUD and confirm with ENTER.
SETTINGS
LEVEL MODE
FREQ
DEFINE AUX INPUT:
VID/BaseBand AUD
INPUT
AUX AUTO
MAIN
REMARK
SETTINGS
LEVEL MODE
FREQ
DEFINE MAIN INPUT:
VID/BaseBand AUD
INPUT
AUX AUTO
MAIN