User`s manual

Audio/Video Auxiliary Input P ULSAR
Page 6
5 SETTINGS
•
Connect video and audio signals to the
MAIN and AUX inputs. The aux video input is standard loop
through. If necessary use the 75 Ohm termination delivered with the accessory set.
•
Select the
MAIN input.
•
Select
MODE
•
Scroll into the
MODE settings with the LEFT or RIGHT arrow for the DEFINE MAIN INPUT command.
•
Select the VID/Baseband AUD mode with the
UP or DOWN arrow. Confirm by pressing ENTER.
SETTINGS
LEVEL MODE
FREQ
DEFINE MAIN INPUT:
VID/BaseBand AUD
INPUT
AUX AUTO
MAIN
•
Select the
AUX input.
•
Select the VID/Baseband AUD mode with the
UP or DOWN arrows. Confirm by pressing ENTER.
SETTINGS
LEVEL MODE
FREQ
DEFINE AUX INPUT:
VID/BaseBand AUD
INPUT
AUX AUTO
MAIN
All video, audio and mode parameters for the aux input have to be
selected because you can define all these parameters separately from
the main input. For the description of these settings, refer to the user’s
manual.
REMARK