User`s manual

Installation Filter Module PULSAR
Page 6-6
6.3 SETTINGS
As soon as the PULSAR has been powered up, the new frequency programmed in the eprom of the filter
module will be read. In the menu
FREQ, the new frequency and name will be displayed for a channelized
P
ULSAR. In case of an agile filter: the name and the frequency of the devices are displayed in separated
items. The frequency can be changed in steps of 12.5 kHz by using the
UP and DOWN arrow. With the
LEFT and RIGHT arrow you can move through the different digits.
SETTINGS
LEVEL MODE
FREQ
The channel name can be
modified. (max 15 characters).
FREQUENCY:
600.000 MHz
NAME:
PULSAR
CHANNELIZED : 275.2500 MHz
NAME: MTV
agile
Pulsar
channelized
Pulsar