User`s manual

Operation PULSAR
Page 5-8
5.4 SETTINGS
RF OUTPUT LEVEL:
60 dBmV
SLOPE CONTROL:
_ _ _ _ _ _ _ _ _ _ _ _ _ _
FLAT
CALIBRATE SLOPE:
EXECUTE
SETTINGS
LEVEL MODE
FREQ
If off, the S/V ratio
and Audio dev will be
displayed as ’----’.
S/V RATIO:
-10 dB
- - - - - - - - - - - - - - - TILT DOWN
CLAMP: VAGC: MOD-METER:
B-PORCH SYNC SYNC
WHITE LIMITER:
ON
AUDIO PREEMPH:
OFF
ON
The channel name can be
modified. (max 15 characters).
Adjustable between
50 and 60 dBmV.
FREQUENCY:
600.000 MHz
NAME:
PULSAR
CHANNELIZED : 275.2500 MHz
NAME: MTV
agile
Pulsar
channelized
Pulsar
- - - - - - - - - - - - - - - TILT UP
RF OUTPUT:
ON
INT. SOUND CARRIER:
ON
OFF
Adjustable between
-8 and -20 dB.
OFF
SYNC
-13 dB, -20 dB
In case of stereo two
internal soundcarriers
are displayed and
can be set on or off
seperately.
5.4.1 Frequency Settings
The basic PULSAR version is the channelized PULSAR. As the output frequency is a fixed frequency, only
the channel name can be changed. Press the
UP or DOWN arrow to enter into the edit mode. The char-
acter that can be changed is underlined. Move to another character of the channel name with the
LEFT
and RIGHT arrows. Select the desired character, sign or number with the UP and DOWN arrow.
In case of an agile P
ULSAR, both the channel name and output frequency can be changed in the same
way as described above. The frequency is adjustable in steps of 12.5 kHz. The frequency range is 45 to
600 MHz or 600 to 860 MHz depending on the P
ULSAR’S converter type.