User`s manual

P ULSAR BG Separate IF Outputs
Page 7
6.2 STEREO PULSAR
In a standard configuration it is not possible to change S/V1 and S/V2 separately. With the Separate
IF Outputs the S/V ratios can be set individually.
The default setting for the S/V ratios is 0 dB with a range from 0 to -15 dB for both.
Both S/V ratios can be attenuated 10 dB by changing some bridges. For S1/V ratio this is done by
bridges BR1, BR2 and BR6, for S2/V ratio by bridges BR3, BR4 and BR5. When one changes the
bridges one has to execute CLEAR ALL DATA & RESTART in the
STATUS menu.
figure 1: the default position of
the bridges (towards front
panel)
figure 2: position of the bridges
when an attenuation of 10 dB
is inserted
BR6 BR2 BR1
BR6 BR2 BR1
BR5 BR4 BR3
BR5 BR4 BR3
TOP VIEW