Operator`s manual

8 = Mosaic
Query:
TRNM?
Returns the transition type in the format:
=n
Example: TRNM 2 (Dissolve using transition # 2, wipe right effect)
TRNM? (Returns the transition type.)
Command:
TRNT n.n
Description: Transition Time for dissolve and wipe-type transitions.
Parameters: n.n - time; [0 – 5.0]
Query:
TRNT?
Returns the transition time in the format:
=n.n
Example: TRNT 3.5 (Sets for a 3.5 second transition.)
TRNT? (Returns the transition time.)
Command:
UL op n
Description: Receives the selected input source’s input configuration parameters from a remote device over the
serial port.
Parameters: op - I
n - input source; [1-7]
Example: UL I 5 (Sends the input configuration parameters of input source 5.)
Command:
VBW n
Description: Selects the Video Bandwidth type for the current source.
Parameters: n - Bandwidth Mode; [0|1], Full|Reduced
Query:
VBW?
Returns the Video Bandwidth in the format:
=n
Example: VBW 1 (Selects a reduced video bandwidth.)
VBW? (Returns the video bandwidth.)
Command:
VER
Description: This is a version query. The return format is ss.rr.a where:
ss is the software version
rr is the version of the rbf set
a is an alpha character used to designate minor releases
Parameters: None
Example: VER (Returns =ss.rr.a to a terminal emulator.)
Command:
VOL op n
Description: Audio Volume for selected audio input.
Parameters: op - Audio input; [M|V|C|L|1-7], Main|Video|Mic|Line|Input 1-7
nnn - Volume value; M: 0-77, V: 0-127, CL: 0-178, In1-7: 0-51
Query:
VOL? op
Returns the Audio Volume for the selected audio input in the format:
=nnn
Example: VOL 2 45 (Set Audio Input Source 2 to a trim of 45.)
VOL? M (Returns the trim level of Main Volume.)
Command:
Manual # 26-0006901-00 / Revision E PresentationPRO – A/V Seamless Switcher 39