Operator`s manual

Remote Commands
AUDEN op n Audio Enable: op[M|V|C|L|1..7] n[0|1] MUTE|ON
AUDEN? op Querry Audio Enable: op[M|V|C|L|1..7] Returns mode [0|1]
AVT op n A-V Type: op[1..7] n[0|1] Pro|Consumer
AVT? op Query A-V Type: Returns op[1..7] n[0|1] Pro|Consumer
DL op n Download CFG: op[I] n[1..7]
ECHO Echo Enable/Disable: n[0|1] DISABLE|ENABLE
ECHO? Query Echo Enable/Disable: Returns mode[0|1] DISABLE|ENABLE
FPLOCK Front Panel Lock Out: op[D|A|M] Disable|All|Menu Only
FPLOCK? Query Front Panel Lock Out: Returns mode [D|A|M] Disable|All|Menu
FREEZ n Freeze: n[0|1] OFF|ON
FSB n Force Scaler Black: n[0|1], OFF|ON
FSB? Query Force Scaler Black: Returns n[0|1], OFF|ON
HELP Displays command list
IBRT op nnn Input Brightness: op[C|R|G|B] C[75..125]% RGB[-25..25]%
IBRT? Query Input Brightness: Returns common, red, green and blue %
ICGTE n Input Clamp Gate: n[0-2], SYNC|PRCH|PDLY
ICGTE? Query Input Clamp Gate: Returns mode n[0-2], SYNC|PRCH|PDLY
ICNT op nnn Input Contrast: op[C|R|G|B] c[75..125]% RGB[-25..25]%
ICNT? Query Input Contrast: Returns common, red, green and blue %
ICPHO nn Input clock phase offset: n[-31..31]
ICPHO? Query Input clock phase offset: Returns [-31..31]
ICPL op nnnn Input Clocks Per Line: op [A|M] AutoConfig|Manual n[0..4096]
ICPL? Input Clocks Per Line: Returns [0..4096]
ICREC Input Configuration Recall of Current Source
ICRST Input Configuration Reset of Current Source
ICSAV n Input Configuration Save: n[1-7] input source
ICSP n Input Colorspace
: n[0..6], RGB|B50|B60|MII|EBU|NTSC|SVID
ICSP? Query Input Colorspace: Rets [0..6] RGB|B50|B60|MII|EBU|NTSC|SVID
IHUE nnn Input Hue: n[0 - 360] degrees
IHUE? Query Input Hue: Returns [0..360] degrees
IRSP op nnn Input Raster Size/Position: op[L|R|T|B] n[-999..999]
ISAT nnn Input Saturation: n[50-200]%
ISAT? Query Input Saturation: Returns [50..200]%
ISYNC n Input Sync: n[0..3], SOG|CSYN|H/V|AUTO
ISYNC? Input Sync: Returns [0..3] SOG|CSYN|H/V|AUTO
LCK? Query Video Lock: Returns [0..2] NOTLOCK|MATCH|NOMATCH
LINET n Line Type: n[0|1] Pro|Consumer
LINET? Query Line Type: [0|1] Pro|Consumer
LOADR Puts graphics board into LOADR mode
MADB n Motion Adaptive De-interlacing Bypass: n[0|1] ENABLE|DISABLE
MADB? Query Motion Adaptive De-interlacing Bypass: [0|1] ENABLE|DISABLE
MCGN n Mic Gain: n[0..2] -57dB|-50dB|-43dB
MCGN? Query Mic Gain: [0..2] -57dB|-50dB|-43dB
OCRECF n Output Resolution: n[0..7, 10,14,16,18,20]
OCRECF? Query Output Resolution: Returns [0..7, 10,14,16,18,20]
OFRATE n Output Frame Rate: n[0..2] 50Hz|59.94Hz|75Hz
OFRATE? Query Output Frame Rate: Returns [0..2] 50Hz|59.94Hz|75Hz
OSYNC n Output Sync.: n[1..5] GR|-C|+H+V|+H-V|-H+V|-H-V
OSYNC? Query Output Sync.: Returns [1..5] GR|-C|+H+V|+H-V|-H+V|-H-V
OTPM typ bx gr Output Test Pattern: type[0..5] box[0,1] grid[0,1]
OTPM? Query Output Test Pattern: Returns type[0..5] box[0,1] grid[0,1]
PFSD n Progressive Frame Sequence Det. (3-2 Pulldown): n[0,1] Disable|Enable
PFSD? Query Progressive Frame Sequence Det. (3-2 Pulldown): Returns [0,1]
Disable|Enable
PPWR n Phantom Power: n[0,1] Off|On
PPWR? Query Phantom Power: Returns [0,1] Off|On
RESET op Reset Defaults: op[A|F] All|Factory
Manual # 26-0006901-00 / Revision E PresentationPRO – A/V Seamless Switcher 30