Operator`s manual

Video Output Connections
Two independently buffered RGB outputs are provided. The video on the two output connectors is identical and the
signals are designed to connect to projectors and monitors with standard HD-15 cables. One output should be
connected to the projection system. The other output may be used for remote monitoring or down-converted to allow
the presentation to be recorded. Note that the type of output sync can be selected to match application requirements.
Separate C (Composite) or separate H/V (Horizontal/Vertical) sync modes are supported (refer to page 23 ).
Connection pins on the output connectors are specified below.
RGB
Output
Pin 1
RED
Pin 2
GREEN
Pin 3
BLUE
Pin 4
Pin 5
Pin 6
RED return
Pin 7
GREEN return
Pin 8
BLUE return
Pin 9
Pin 10
GND
Pin 11
Pin 12
Pin 13
Hsync or Csync
Pin 14
Vsync
Pin 15
15
1115
HD-15 Input Connector Pinout
(as viewed from rear of unit)
Manual # 26-0006901-00 / Revision E PresentationPRO – A/V Seamless Switcher 9