User manual
Table Of Contents
- 1. SAFETY
- 2. GENERAL
- 3. PHYSICAL INSTALLATION
- 4. PROJECTOR PARTS AND FUNCTIONS
- 5. GETTING STARTED
- 5.1 RCU & Local keypad
- 5.2 Remote Control and OSD Lite on Screen
- 5.3 Power on projector
- 5.4 Switching to standby
- 5.5 Power off projector
- 5.6 Range of effective remote control signal reception
- 5.7 Source selection
- 5.8 Changing OSD language
- 5.9 Adjusting the lens by horizontal and vertical lens shift
- 5.10 Introduction the OSD Lite on screen
- 6. ADVANCED OSD MENU
- 7. INPUT
- 8. IMAGE
- 9. LAYOUT
- 10. LAMP
- 11. ALIGNMENT
- 12. CONTROL
- 13. SERVICE
- 14. MAINTENANCE
- 15. PROJECTOR SPECIFICATION
- 16. ENVIRONMENTAL INFORMATION
PJWU-101B 17/10/2014
30
5. Getting Started
Hotkey / Short Cut Remo
result
RCU Lite ->OSD Lite
action -> on screen
to quick adjust a blurry screen
mute picture and sound on the projector
>
unmute picture and sound on the
projector
press any key
Main menu is on screen.
go to button
result
RCU Lite -> OSD LIte
action -> on screen
select input manually
> go to input desired (default setting = auto select)
>
make the image brighter
or darker
use arrow keys to slide
default setting= middle
>
adapt the contrast
between light/dark areas
use arrow keys to slide
default setting= middle
>
select color preset most
fitted for your image
best condition to view “computer” images
(default setting=NATIVE)
best option to view movies
100% bright
adjust aspect ratio
> go to aspect ratio desired (default setting = NATIVE)
>
adjust focus of image
>
adjust size of image
>
adjust position of image
>
adjust keystone
>
select language
> go to language desired (default setting = ENGLISH)
>
show lamp info
>
show lamp mode
> go to lamp mode desired (default setting = NORMAL) >
show projector info
>
enter advanced menu
> Use the password ""to enter the advanced menu >