User Manual and Operating Guide

3. Commands
Request
Pos Size Name Description Content
0x2A
0x01
0-2 3 set TCP/IP
0xA3
first octet (h ex)
second octet (hex)
third octet (hex)
3-6 4 IP address
fourth octet (hex)
first octet (h ex)
second octet (hex)
third octet (hex)
7-10 4 subnet mask
fourth octet (hex)
first octet (h ex)
second octet (hex)
third octet (hex)
11-14 4 default gateway
fourth octet (hex)
0x00
Off (hex)
15 1 DHCP
0x01
On (hex)
3.91 set tint, write
About this comma nd
This com mand sets the tint value of the active sour ce.
Request
Pos
Size
Name Description
Content
0 1 set adj byte value known as "set adj"
0x20
set adj (hex)
11adjtint
0x04
adj tint (hex)
2 1 tint value range 0->255
tint value (hex)
3.92 set V start, write
About this comma nd
This command s ets the vertical start pixel for the VGA a nd B NC inputs.
Request
Pos
Size
Name Description
Content
0 1 set adj byte value known as "set adj"
0x20
set adj (hex)
11setVstart
0x12
set V start (hex)
2 1 V start value range 0->20
(OSD range -1 0->10)
V start v alue (hex)
R5905746 COMMAND CATALOG 06/01/2014 47