User Manual and Operating Guide

3. Commands
Pos
Size
Name Description
Content
0x00
red (hex)
0x01
green (hex)
21color
color specification
0x02
blue (hex)
3 1 balance value range 0->100
(OSD range 0 ->100)
balance value (hex)
3.70 set input selection, write
About this comma nd
This command sets the input of the projector.
Request
Pos
Size
Name Description
Content
0 1 write input selection
0x33
write input selection (hex)
0x00
HDMI (hex)
0x01
VGA (hex)
0x02
DVI (hex)
0x03
BNC (hex)
1 1 input slot
0x04
CVBS (hex)
3.71 set input white balance, write
About this comma nd
This com mand sets the input white balance value of the active source. This is applicable for the specified color.
Request
Pos
Size
Name Description
Content
0 1 set adj byte value known as "set adj"
0x20
set adj (hex)
1 1 adj input white balance
0x6F
adj input white ba lance (hex)
0x00
red (hex)
0x01
green (hex)
21color
color specification
0x02
blue (hex)
3 1 balance value range 0->100
(OSD range 0 ->100)
balance value (hex)
3.72 set internal pattern, write
About this comma nd
This comm and sets the internal p attern.
Request
Pos
Size
Name Description
Content
0 1 set internal pattern
0x41
set internal pattern (hex)
R5905746 COMMAND CATALOG 06/01/2014 41