User Manual and Operating Guide

3. Commands
3.66 set gamma, write
About this comma nd
This command sets the gamma v alue.
Request
Pos Size Name Description Content
0 1 set adj byte value known as "set adj"
0x20
set adj (hex)
1 1 adj gamma
0x70
adj gamma (hex)
0x00
film (hex)
0x01
video (hex)
0x02
graphics (hex)
2 1 gamm a value
0x03
standard (hex)
3.67 set H start, write
About this comma nd
This command sets the horizontal start p ixel for the V GA and BNC inputs.
Request
Pos
Size
Name Description
Content
0 1 set adj byte value known as "set adj"
0x20
set adj (hex)
1 1 set H start
0x11
set H start (hex)
2 1 H start value range 0->100
(OSD range 0 ->100)
H start value (hex)
3.68 set high altitude, write
About this comma nd
This command sets the h igh altitude setting.
Request
Pos
Size
Name Description
Content
0 1 set high altitude
0x69
set high altitude (hex)
1 1 set high altitude
0x40
set high altitude (hex)
0x00
Off (hex)
2 1 high altitude status
0x01
On (hex)
3.69 set input black balance, write
About this comma nd
This com mand sets the input black balance value of the active source. This is applicable for the specified color.
Request
Pos Size Name Description Content
0 1 set adj byte value known as "set adj"
0x20
set adj (hex)
1 1 adj input black balance
0x6E
adj inp black balance (hex)
40 R5905746 COMMAND CATALOG 06/01/2014