User Manual and Operating Guide

3. Commands
Pos
Size
Name Description
Content
0x00
Off (hex)
21
auto pow er off status
0x01
On (hex)
3.56 set auto power on, write
About this comma nd
This comm and sets the auto power on mode.
Request
Pos
Size
Name Description
Content
0 1 set adj byte value known as "set adj"
0x20
set adj (hex)
1 1 adj auto power on
0xA7
adj a uto p ower on (hex)
0x00
Off (hex)
21
auto pow er on s tatus
0x01
On (hex)
3.57 set auto source, write
About this comma nd
This comm and sets the auto source status.
Request
Pos Size Name Description Content
01
set auto source
0x90
set auto source (hex)
11
set auto source
0x01
set auto source (hex)
0x00
Off (hex)
21
auto source status
0x01
On (hex)
3.58 set brightness, write
About this comma nd
This command sets the brightness value of the active source.
Request
Pos
Size
Name Description
Content
0 1 set adj byte value known as "set adj"
0x20
set adj (hex)
1 1 adj brightness
0x02
adj brightness (hex)
2 1 brightness value range 0->255
brightness value (hex)
3.59 set ceiling mode, write
About this comma nd
This command sets the c eiling mode.
R5905746 COMMAND CATALOG 06/01/2014
37