User Manual and Operating Guide

3. Commands
3.52 reset settings to factory defaults, write
About this comma nd
This command resets the settings to factory defaults.
Request
Pos Size Name Description Content
0 1 factory defaults
0x31
factory defaults (hex)
3.53 set aspect ratio file, write
About this comma nd
This co mm and sets the aspect ratio file value.
Request
Pos
Size
Name Description
Content
0 1 set adj byte value known as "set adj"
0x20
set adj (hex)
1 1 adj aspect ratio
0x0B
adj aspect ratio (hex)
21
aspect ratio file
0xC0
aspect r atio file (hex)
0x00
invalid (hex)
0x01
4:3 (hex)
0x02
16:10 (hex)
0x03
native (hex)
3 1 aspect ratio
0x04
auto (hex)
3.54 set auto image adjust, write
About this comma nd
This command sets the auto image adjust mode.
Request
Pos
Size
Name Description
Content
0 1 set adj byte value known as "set adj"
0x20
set adj (hex)
1 1 adj auto image
0xA8
adj auto image (hex)
0x00
Off (hex)
0x01
always (hex)
2 1 auto image adjust status
0x02
auto (hex)
3.55 set auto power off, write
About this comma nd
This comm and sets the auto power off mode.
Request
Pos Size Name Description Content
0 1 set adj byte value known as "set adj"
0x20
set adj (hex)
1 1 adj auto power off
0xA6
adj a uto p ower off (hex)
36 R5905746 COMMAND CATALOG 06/01/2014