User Manual and Operating Guide

3. Commands
3.33 get main zoom, read
About this comma nd
This command gets the main zoom in/out.
Request
Pos Size Name Description Content
0 1 get main zoom
0xA1
get main zoom (hex)
1 1 get main zoom
0x00
get main zoom (hex)
Response
Pos
Size
Name Description
Content
0 1 get main zoom
0xA1
get main zoom (hex)
1 1 get main zoom
0x00
get main zoom (hex)
2 1 main zoom value range 0->70
(OSD range -20->+50 )
main zo o m va lue (hex)
3.34 get menu position, read
About this comma nd
This command gets the menu p osition.
Request
Pos
Size
Name Description
Content
0 1 get menu position
0x91
get m enu position (he x)
1 1 get menu position
0x02
get m enu position (he x)
Response
Pos Size Name Description Content
0 1 get menu position
0x91
get m enu position (he x)
1 1 get menu position
0x02
get m enu position (he x)
0x00
top left (hex)
0x01
top right (hex)
0x02
center (hex)
0x03
bottom left (hex)
2 1 menu position value
0x04
bottom right (hex)
3.35 get no signal color logo, read
About this comma nd
This c omm and gets the blanking color value and logo status, us ed when no signal is connected.
Request
Pos
Size
Name Description
Content
0 1 get adj byte value known as "get adj"
0x21
get adj (hex)
1 1 adj no signal color
0x7B
adj n o signal color (hex)
28 R5905746 COMMAND CATALOG 06/01/2014