User Manual and Operating Guide

3. Commands
3.26 get input white balance, read
About this comma nd
This com mand gets the input wh ite balanc e value of the active source. This is applicable for the specified color.
Request
Pos Size Name Description Content
0 1 get adj byte value known as "get adj"
0x21
get adj (hex)
1 1 adj input white balance
0x6F
adj input white ba lance (hex)
0x00
red (hex)
0x01
green (hex)
2 1 color color specification
0x02
blue (hex)
Response
Pos
Size
Name Description
Content
0 1 get adj byte value known as "get adj"
0x21
get adj (hex)
1 1 adj input white balance
0x6F
adj input white ba lance (hex)
0x00
red (hex)
0x01
green (hex)
21color
color specification
0x02
blue (hex)
3 1 balance value range 0->100
(OSD range 0 ->100)
balance value (hex)
3.27 get internal pattern, read
About this comma nd
This command gets the internal pattern.
Request
Pos
Size
Name Description
Content
0 1 get internal pattern
0x42
get internal pattern (hex)
Response
Pos Size Name Description Content
0 1 get internal pattern
0x42
get internal pattern (hex)
0x00
none (hex)
0x01
white (hex)
1 1 internal pattern number
0x02
grid (hex)
3.28 get IP configuration info, read
About this comma nd
This command gets the "IP configuration info" of the projector.
24
R5905746 COMMAND CATALOG 06/01/2014