User Manual and Operating Guide

3. Commands
Pos
Size
Name Description
Content
0x00
film (hex)
0x01
video (hex)
0x02
graphics (hex)
9 1 gamm a value
0x03
standard (hex)
3.24 get input black balance, read
About this comma nd
This com mand gets the input black balance value o f the active source. Th is is applicable for the spe
cified color.
Request
Pos
Size
Name Description
Content
0 1 get adj byte value known as "get adj"
0x21
get adj (hex)
1 1 adj input black balance
0x6E
adj inp black balance (hex)
0x00
red (hex)
0x01
green (hex)
21color
color specification
0x02
blue (hex)
Response
Pos Size Name Description Content
0 1 get adj byte value known as "get adj"
0x21
get adj (hex)
1 1 adj input black balance
0x6E
adj inp black balance (hex)
0x00
red (hex)
0x01
green (hex)
2 1 color color specification
0x02
blue (hex)
3 1 balance value range 0->100
(OSD range 0 ->100)
balance value (hex)
3.25 get input selection, read
About this comma nd
This command gets the input of the projector.
Request
Pos Size Name Description Content
0 1 read input s election
0x34
read input selection (hex)
Response
Pos
Size
Name Description
Content
0 1 read input s election
0x34
read input selection (hex)
0x00
HDMI (hex)
0x01
VGA (hex)
0x02
DVI (hex)
0x03
BNC (hex)
1 1 input slot
0x04
CVBS (hex)
R5905746 COMMAND CATALOG 06/01/2014 23