User Manual and Operating Guide

3. Commands
3.9 get brightness, read
About this comma nd
This command gets the brightness value of the active source.
Request
Pos Size Name Description Content
0 1 get adj byte value known as "get adj"
0x21
get adj (hex)
1 1 adj brightness
0x02
adj brightness (hex)
Response
Pos
Size
Name Description
Content
0 1 get adj byte value known as "get adj"
0x21
get adj (hex)
1 1 adj brightness
0x02
adj brightness (hex)
2 1 brightness value range 0->255
brightness value (hex)
3.10 get ceiling mode, read
About this comma nd
This command gets the ceiling mo de.
Request
Pos Size Name Description Content
0 1 get adj byte value known as "get adj"
0x21
get adj (hex)
1 1 adj ceiling
0xA3
adj ceiling (hex)
Response
Pos
Size
Name Description
Content
0 1 get adj byte value known as "get adj"
0x21
get adj (hex)
1 1 adj ceiling
0xA3
adj ceiling (hex)
0x00
Off (hex)
2 1 ceiling mode status
0x01
On (hex)
3.11 get color temperature, read
About this comma nd
This command sets the color temperature of th
eactivesource.
Request
Pos
Size
Name Description
Content
0 1 get adj byte value known as "get adj"
0x21
get adj (hex)
1 1 adj color temperature
0x45
Response
Pos Size Name Description Content
0 1 get adj byte value known as "get adj"
0x21
get adj (hex)
1 1 adj color temperature
0x45
16 R5905746 COMMAND CATALOG 06/01/2014