User Manual and Operating Guide

3. Commands
Pos
Size
Name Description
Content
0x00
Off (hex)
43 1 rear projection mode
status
0x01
On (hex)
0x00
Off (hex)
44 1 ceiling mode status
0x01
On (hex)
0x00
invalid (hex)
0x01
auto (hex)
0x02
RGB (hex)
45 1
format (color space)
0x03
YUV (hex)
3.3 get advanced control info, read
About this comma nd
This command gets the "adv anced con trol info" of the projector.
Request
Pos
Size
Name Description
Content
0x2A
0x05
0-2 3
get advanc ed c ontrol info
0xA2
Response
Pos Size Name Description Content
0x2A
0x05
0-2 3 get advanced control info
0xA2
0x00
invalid (hex)
0x01
native (hex)
0x02
3200K (hex)
0x03
5400K (hex)
0x04
6500K (hex)
3 1 color temperature value
0x05
8800K (hex)
4 1 gain R range 0->100
(OSD range 0 ->100)
gain R (hex)
51
gain G
range 0->100
(OSD range 0 ->100)
gain G (hex)
6 1 gain B range 0->100
(OSD range 0 ->100)
gain B (hex)
7
1
offset R
range 0->100
(OSD range 0 ->100)
offset R (hex)
8 1 offset G range 0->100
(OSD range 0 ->100)
offset G ( hex)
91
offset B
range 0->100
(OSD range 0 ->100)
offset B (hex)
10 1 TBD
TBD (reserved) (hex)
R5905746 COMMAND CATALOG 06/01/2014 13