Instruction manual

PDS • User’s Guide 119
7. PDS-902 3G Enhancements
Input and Output Specifications
fåéìí=~åÇ=lìíéìí=péÉÅáÑáÅ~íáçåë
This section describes the input and output enhancements provided by the PDS-902 3G.
Unless noted here, the input and output specifications are the same as on previous PDS
systems.
fåéìí=péÉÅáÑáÅ~íáçåë
The inputs for the PDS-902 3G are similar to those of earlier models, with the following
exceptions:
• The standard 3G/HD/SD SDI input now accepts the BarcoLink format:
~ BarcoLink
• BarcoLink @50 (1920x1200 @50)
• BarcoLink @59.94 (1920x1200 @59.94)
• BarcoLink @60 (1920x1200 @60)
The Barco proprietary BarcoLink technology enables WUXGA (1,920 x
1,200p @ 50/59.94/60 Hz) signals to be transmitted via a single coaxial
cable over a distance up to 100 meters. BarcoLink only works between
Barco image processing tools and projectors.
Table 7-1. PDS-902 3G Input Specifications
Parameter Detail Specification
Inputs 1 - 4 Connector HD-15 VGA
Format RGBHV, YUV, or composite video and Y/C NTSC/PAL
Sampling 10-bits/color at 165 MHz maximum
Supports 1:1 sampling up to 1920x1080p @60Hz
Sources with native pixel rates > 165 MHz will be filtered
and undersampled at 165 Mhz, including:
• 1600x1200@60 (162 MHz)
• 1920x1080p@60 (173.0 MHz)
• 1920x1200@60 (193.25 MHz)
• 2048x1080p@60 (183.75 MHz)
EDID Analog EDID support has been implemented
Inputs 5 - 8
Connector DVI-I, per DDWG 1.0
Sampling 1080i RGB input support on DVI digital input (from Turbo
iDDR)
Format (Digital) 8-bit DVI, RGBHV data via analog pins
Format (Analog) RGBHV / RGBS / RGsB computer video, YPbPr video
(SD or HD), S-video, or composite video
HDCP hardware
support
HDCP version 1.0 compliant
EDID Analog EDID support via standard EDID pins used for DVI
Input 9
Connector BNC