Projector User Manual

1. Safety instructions
1. SAFETY INSTRUCTIONS
1.1 Safety during kit installation
WARNING: The procedures below may only be performed by Barco trained and qualified technicians.
WARNING: Power down the projector and remove the power cord form the wall outlet before removing any
of the projector co vers.
WARNING: T he projector m ust be cooled do wn before rem oving any of the p rojector covers: wait for the cool
down cycle to finish after swi tching the projector to standby (the sound of the fans comes to a very low level)
and wait for 15 mo re m inutes before start ing any of t he pro cedures b elow.
CAUTION: Wear a wrist band which is connected to the ground while handling the electrostatic discharge
sensitive parts.
R59770498 PMP KIT 28/02/2011 3