Projector User Manual

3. Kit installation (detailed)
How to remove the PMP?
1. Remove the input module (see concerning chapter)
2. Remove both screws fixing the PMP to the front plate
Image 3-4
PMP: front fixing screws
3. Remove the side screws fix ing the input boards to the PM P
Image 3-5
4. Disconnect the PMP from the inputs by unplugging the board-to-board conn ectors
Image 3-6
PMP: unplug from input boards
5. Remove the LVDS connector from the PMP (see chapter LVDS interface )
R59770498 PMP KIT 28/02/2011
9