B4100528 / 03 November2005 MFCD 1219 - MFCD 1219 TS Installation & User Manual
SAFETY INSTRUCTIONS • Adapter manufacturer: Linearity Electronics Co. Ltd., Model: LAD6019AB5, complies with UL Certified Class 2 Power adapter or UL Certified ITE Power adapter with LPS, and Suitable ratings. • Read the safety and operating instructions before operating the apparatus. • Retain safety and operating instructions for future reference. • Adhere to all warnings on the apparatus and in the operating instructions manual. • Follow all instructions for operation and use.
CONTENTS 1. Overview ....................................................................................................... 1.1 Introduction ............................................................................................. Multi-scan capabilities ............................................................................... Touch panel ............................................................................................... 1.2 Package contents ...........................................
1. OVERVIEW 1.1 Introduction The MFCD 1219 (TS), BARCO’s full color 19” LCD display, guarantees perfect image quality in medical imaging applications. The display combines a TFT (thin film transistor) liquid crystal display panel structure and a built-in backlight with inverter for a better picture quality.
Power Saving The monitor comes with a power saving feature; therefore, you may put the monitor into a power saving state when it is not in use. This feature complies with both EPA‘s Energy Star requirements and European NUTEK/TCO’s power management guidelines. It conforms to Video Electronics Standard Association (VESA) approved DPMS power-down signaling method. This monitor automatically cuts down power consumption of monitor set when not detecting Hsync or Vsync signals.
1.3 Controls and connectors (10) (1) (2) (3) (4) (5) (6) (7) (8) (9) (1) 12V DC power input (2) Analog video input (3) DVI input (DVI-D supported only) (4) USB port for touch panel connection to PC (MFCD 1219 TS only) (5) Menu key (6) <-> Key (7) <+> Key (8) Power LED The LED is off when the display is off. The LED is green when the display is on.
2. INSTALLATION 2.1 Precautions • Keep your original packaging. It is designed for this display and is the ideal protection during transport. • Avoid reflections in the flat panel to reduce eye strain. • Place the display on a strong and stable table or desk. • Keep the display away from heat sources and provide enough ventilation in case it is built in a rack or console. Do not put in direct sunlight. • Make sure computer and display are switched off before connecting the signals.
A 2 Slide back the locks at both sides of the mounting plate (B). In that way, you can secure the panel to the mounting plate after placing the panel. B Step 3: Place the panel on the mounting plate 1 Place the panel on the mounting plate (C). If you want to secure the panel to the mounting plate, place the panel in the frontmost notches. Please make sure that the four shafts are securely placed in the notches of the mounting plate.
2 To secure the panel, slide forward the locks on both sides of the mounting plate. Lock the panel with one screw at both sides (D). D 2.3 Connecting the signals To connect the video & sync signals: 1 Connect one end of the appropriate video cable to the corresponding video input of the monitor. Analog video: Connect to input (2) DVI: Connect to input (3) 2 Connect the other end of the video cable to the video output of your video source.
2.4 Starting up Proceed as follows: 1 Switch on the computer. 2 Switch on the display by pushing the Power key (8). 3 If necessary, select a suitable resolution in the computer operating system. Please refer to Appendix A, "Possible resolutions" in the back of this manual. Note: The recommended resolution for best image quality is 1280x1024 at 60 Hz.
3. ON-SCREEN DISPLAY (OSD) MENUS 3.1 How to use the OSD Proceed as follows: 1 Press the Menu key (4) on the front to display the OSD main menu. Note: It may be possible that the OSD menu does not appear. If this is the case, the front Controls are locked. To unlock them, please follow the procedure described in § 3.2 below. (4) 2 Press the <+> key (6) or <-> key (5) to scroll to the desired menu item. 3 Press the Menu key (4) to activate the selected function or to enter the selected secondary menu.
3.2 Description of the menu items Main menu Function Description Brightness To adjust the overall image and background brightness level. Contrast To adjust the image brightness in relation to the background (the background is unchanged). Auto Adjust * To automatically set the H Position, V Position and Clock. Horizontal Position To move the screen horizontally left or right. Vertical Position To move the screen vertically upward or downward.
**To unlock the Controls, proceed as follows: 1 Press the Power key to switch off the display 2 With one hand, press and hold the <+> and the <-> key at the same time. With the other hand, press the Power key shortly to switch the display on again. 3 Keep holding the <+> and the <-> key for about 3 seconds. 4 At last, release the <+> and the <-> key. Now, by pressing the Menu key, the OSD menu will appear.
To perform the Autobalance function, you need to select a proper test pattern before performing the function. Proceed as follows: 1 You must have installed the Barco NioWatch software. 2 Right-click on the NioWatch systray icon. 3 Select Test Patterns from the pop-up menu. 4 Select the SMPTE test pattern. 5 Now perform the function Autobalance from the MFCD 1219 (TS) control panel. 6 When finished, click on the test pattern to close it.
4. MAINTENANCE Panel Take care not to damage or scratch the panel. Clean with a soft woolen or cotton towel. Use a watery solution or a mild commercial glass cleaning solution. Cabinet Do not use chemical cleaning products, benzene, toluene, xylene or other solvents. Clean with a soft cloth dampened with mild detergent and water. Repeat this with water only and wipe dry with a dry cloth. Touch panel (Only for MFCD 1219 TS) Use a clean and soft clothe with neutral detergent or with ethanol for cleaning.
APPENDIX A: POSSIBLE RESOLUTIONS There are 22 preset modes and 2 user modes. The following modes are preset as factory defaults. Resolution Pixel Horizontal Vertical Freq. (MHz) Freq. (kHz) Freq. (Hz) Standard Analog Digital 640 x 350 25.175 31.47 70 VGA V V 640 x 480 25.175 31.47 60 VGA/VESA V V 30.24 35.00 67 Mac V 31.50 37.90 72 VESA V 31.50 37.50 75 VESA V 36.00 43.30 83 VESA V 720 x 400 28.321 31.47 70 VGA V 800 x 600 36.00 35.10 56 VESA V 40.00 37.
APPENDIX B: TECHNICAL SPECIFICATIONS Picture panel 19-inch diagonal viewable screen TFT (thin film transistor) active matrix, color liquid crystal display, RGB interface Touch panel (MFCD 1219 TS only) Resistive technology Interface: USB 1.1 Input mode: stylus or finger Touch active force (stylus ∅ 0.8 mm): <=50g Input signals Analog: Hor. 31.47 to 91.2 kHz Vert. 56 to 85 Hz Sync types: Separate sync, composite sync, sync on Green Digital: Hor. 31.47 to 64 kHz Vert. 60 to 70 Hz Max.
PnP compatibility VESA DDC 2B standards compliant Safety standards UL60950, cUL60950, IEC60950, CE, CCC Dimensions (W x H x D) 450 mm x 461.8 mm x 213.9 mm Net weight 7.7 kg MFCD 1219 TS: 8.3 kg NOTICE: DUE TO OUR POLICY OF CONTINUOUS PRODUCT IMPROVEMENT, THE ABOVE SPECIFICATIONS ARE SUBJECTED TO CHANGE WITHOUT NOTICE.
