User manual

Display installation
42 Nio MKII
USB connection
The USB connection allows you to use the display as USB hub, to which
you can connect USB devices, such as a keyboard, mouse or digital
camera.
To connect the USB cable:
Figure 16
1. Connect a PC USB downstream connector to the display’s USB
upstream connector by means of a USB cable.
2. Connect any USB device to one of the display’s USB downstream
connectors.
Cable routing
Routing the signal cables
• Bind the cables in the connector compartment together with the
cable tie inside the connector compartment.
• Put the connector compartment cover back on the display. Pay
attention that the signal cables are positioned under the bulge
in the cover.
• Push the cables into the clips on the rear of the tilt & swivel foot.
(1)
(2)