User manual

Display installation
40 Nio MKII
•In a complete NIO system, the image orientation will adapt to
the new panel orientation automatically after a second.
• If you would use the display without the N
IO display controller
board, the image orientation will not change with the panel
orientation.
To change the orientation of the image, you will have to change
the resolution in the Windows Display control panel (if possible).
Power connection
To connect the power:
Figure 13
Figure 14
1. To get access to the connectors, remove the connector
compartment cover by pulling down the 2 clips at the top of the
cover.
(2)
(3)
(2)