User manual

Display controller installation
Nio MKII 35
(see figure 6). For a dual-headed BarcoMed NIO setup, connect the
secondary display to the other connector on the display controller.
7. Reconnect the power cord, turn on the power, and boot the system
as usual.
Running multiple BarcoMed NIO Display Controllers in a single host
The physical order of the displays may vary when you are running
multiple BarcoMed N
IO display controllers. This is due to the PC’s PCI bus
control in the system BIOS, and not the BarcoMed display controller. It
may become necessary, depending on how your PC’s BIOS configures
the PCI bus, to switch your DVI display connections to achieve a linear
desktop configuration.
Figure 6
BarcoMed PCI Express
®
Controllers
During the first quarter of 2006 Barco Medical Imaging Systems added
PCI Express (PCIe) versions of its Nio display controllers to its grayscale