User manual

Display controller installation
32 Nio MKII
Display controller installation
Caution: Wear a grounded, protective ESD strap during installation
or handling of the display controller. Electrostatic charges can
damage the display controller.
Prior to installing your BarcoMed N
IO display controller(s) in your PC
please take a few minutes to familiarize yourself with both the display
controller(s) and the PCI slots in your computer.
Figure 3: The BarcoMed NIO display controller
Using the VGA capabilities of the BarcoMed NIO display controller
Prior to installing the BarcoMed NIO controller, decide if you are
going to use its on-board VGA capabilities. If you are, check the
setting of the Jumper at J-1 on the display controller (see
figure 4). By default, VGA should be enabled, on the top two
pins.