User manual

NioWatch
58
6. When the InstallShield Wizard Complete Screen appears click
“Finish”.
7. Click “Finish” on the BarcoMed Product Installation screen to
complete the install process.
Note: Silent mode installation
You can install NioWatch in silent mode on a system where no
previous version of NioWatch is installed.
Silent mode means that no user intervention is required during
installation.
To install NioWatch in silent mode:
1. Open the command prompt (DOS window) in Windows.
2. Using DOS commands, navigate to the folder containing the
NioWatch setup.exe file on the CD-ROM.
3. Type: “setup.exe_/s_/v/qn” (where “_” represents a space)
Barco LCD sensor installation
In case you will be using the Barco LCD sensor with your system,
you may have to install its driver.
The Barco LCD sensor is a USB device. Connect the sensor to a free
USB downstream connector.
When you connect the sensor for the first time, the “New
hardware found” wizard starts.
In that case, locate the appropriate driver file (.inf file) on the
NioWatch CD-ROM in the folder “BarcoLCDSensor”.