Specifications

Driver and Software Installation
61
• Windows Server 2003 x64 Edition, and
• Windows Vista 32 & 64 Bit Edition.
You will need to install the BARCO NIO Display system drivers and
software in the following cases:
• After you have installed the display controller(s) for your
BARCO NIO Display System in your system for the first time.
• After you have reinstalled or upgraded your operating system.
• After you have moved the display controller(s) to a different
PCI/PCIe slot.
1. Start your system. When the Found New Hardware Wizard
comes up, click Cancel. When the System Settings Change
window asks you to restart your computer, click No or Restart
Later.
2. Run the Barco Product Installation Wizard.
The Barco Product Installation Wizard should start automatically
if you insert the BARCO NIO Display System Installation CD-ROM
into your CD/DVD drive after the operating system has started. If
your CD/DVD drive’s auto-run is not enabled or the Barco
Product Installation Wizard does not start automatically, you can
run the Barco Product Installation Wizard manually by following
these steps:
a) Click the Start button in the task bar.
b) Click Run.
c) Click Browse and browse to the root directory of the
BARCO NIO Display System Installation CD-ROM and click on
the file, Setup.exe, and click Open.
d) Click OK.
or
a) Browse to the root directory of the BARCO NIO Display
System Installation CD-ROM and double click on the file,
Setup.exe.
3. Click Next twice.