Specifications

Driver and Software Installation
59
To install the drivers and software silently, please follow the steps
below:
1. Insert the BARCO NIO Display System Installation CD-ROM into
your CD/DVD drive. When the Barco Product Installation Wizard
starts click “Cancel”.
2. Click the Start button in the task bar.
3. Click Run.
4. Click Browse and
a) Browse to the root directory of the BARCO NIO Display
System Installation CD-ROM.
b) Click on the file, Setup.exe, and click Open.
or
a) Browse to the root directory of the location where you
saved the contents of your BARCO NIO Display System
Installation CD-ROM.
b) Click on the file, Setup.exe, and click Open.
5. In the Open address window, place your cursor at the end of the
line of text that appears and add the following text after
Setup.exe, a space and -silent. Click OK.
Example (where D is the name of your CD/DVD drive):
D:\Setup.exe -silent
See figure 25 for an example of how the command line window
should look when using the silent install from the BARCO NIO
Display System Installation CD-ROM.