Specifications

Connecting the signal cables

To connect the signal cables to the display:

To get access to the connectors, remove the connector compartment

cover by pulling down the 2 clips at the top of the cover.

The location of the connectors depends on the display type:

Figure 19: Inputs E-2621, E-3620, MDNG-5121

Figure 20: Inputs MDNC 3120, MDNC-3121, MDNG-2121 and MDNG-6121

• Connect one end of the DVI cable to the DVI input of the

display (1). Connect the other end of the DVI cable to the DVI

connector of the display controller board.

• Connect a PC USB downstream connector to the display’s USB

upstream connector by means of a USB cable (2).

• Connect any USB device to one of the display’s USB

downstream connectors (3)

• Connect the DC power input (4) of the display to the external

DC power supply. Connect the other end of the external DC

power supply to a grounded power outlet by means of the

proper power cord delivered in the packaging.

3 4